Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
2. Release the tabs and separate the climate control assembly front from the assembly.
3. Using a small screwdriver, twist the bulb and socket and remove.
INSTALLATION
1. To install, reverse the removal procedure.
Climate Control Assembly
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the four console compartment plastic screws or the C/D changer cover plastic screws (if equipped) and the console compartment door or
the C/D changer cover.
3. Remove the instrument panel ash receptacle.
4. Remove the two upper center instrument panel finish panel screws and the two lower center instrument panel finish panel screws.
5. Remove the center instrument panel finish panel and disconnect the cigar lighter socket and the cigar lighter illumination lamp electrical
connectors.
