Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
Air Bag Control Module: Service and Repair
REMOVAL
WARNING: The backup power supply energy must be depleted before any air bag component service is performed. To deplete the backup
power supply energy, disconnect the battery ground cable and wait 10 minutes.
1. Disconnect the battery ground cable and wait 10 minutes for the backup power supply energy to be depleted.
2. Remove the four console compartment plastic screws or the C/D changer cover plastic screws (if equipped) and the console compartment door or
the C/D changer cover (if equipped).
3. Remove the two LH inner instrument panel lower cover screws and the plastic nut, then remove the LH inner instrument panel lower cover and
disconnect the foot lamp electrical connector.
4. Remove the two RH inner instrument panel lower cover screws and the plastic nut. Then remove the RH inner instrument panel lower cover and
disconnect the foot lamp electrical connector.