Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. If removing the second row RH rear safety belt retractor and tongue, remove the two second row RH rear safety belt retractor and tongue bolts and
the second row RH rear safety belt retractor and tongue from the vehicle.
5. If removing the second row RH rear safety belt retractor and tongue, remove the safety belt retractor cover bolt access plug from the auxiliary
buckle located on the RH side of the second row bench seat.
6. If removing the second row RH rear safety belt retractor and tongue, remove the auxiliary buckle anchor bolt and the auxiliary buckle.
7. If removing the LH rear safety belt retractor and tongue, remove the second row LH rear safety belt retractor and tongue bolt and the second row
LH rear safety belt retractor and tongue from the vehicle.
INSTALLATION
To install, reverse the removal procedure.
Third Row
REMOVAL
NOTE: The LH procedure is given. The RH procedure is similar.
1. Remove the quarter trim panel.
2. Remove the third row rear safety belt retractor and tongue upper anchor bolt and D-ring from the rear body pillar.
3. Remove the screw from the rear radio speaker mounting bracket to the third row rear safety belt retractor and tongue.
