Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
NOTE: Apply petroleum jelly to the one-way clutch bearing prior to installation.
3. Align the three pawls of the ring gear thrust washer with the holes in the ring gear and install.
NOTE: Apply petroleum jelly to the ring gear thrust washer prior to installation.
4. Install the one-way clutch bearing onto the ring gear.
NOTE: Apply petroleum jelly to the one-way clutch bearing prior to installation.
5. Install the forward clutch hub onto the ring gear and check the operation of the forward one-way clutch (sprag).