Villager V6-201 3.3L SOHC VIN T SFI (1999)
11.
If the vehicle WAS built between 10/30/00 and 9/5/01, inspect inside the door for the wiring harness contacting the door check strap while
opening and closing the door (Figure 5). If wiring damage is found, repair as necessary. If the vehicle WAS NOT built between 10/30/00 and
9/5/01, proceed to Step 13.
12.
Install a zip tie around the wiring harness and door glass run bracket to secure it away from the door check strap area (DO NOT
OVERTIGHTEN), and trim off the excess tie strap (Figure 6).
13.
Reinstall watershield and door trim panel.
14.
Repeat above steps on the opposite front door.
