Villager V6-201 3.3L SOHC VIN T SFI (1999)
5. Remove the two driver air bag module retaining bolts (one shown) and discard.
CAUTION: After removing, discard the driver side air bag module bolts and install new driver air bag module bolts during installation.
6. Remove the driver air bag module.
1
Separate the driver air bag module from the steering wheel and disconnect the horn pad switch.
2
Remove the driver air bag module.
INSTALLATION
1. Follow the removal procedure in reverse order. Verify that the air bag warning indicator is operative.
CAUTION: The driver side air bag module bolts are coated with a special bonding agent. Always replace the old driver side air bag module bolts
with new driver side air bag module bolts.