mini Workshop Repair Guides

Mini Workshop Service and Repair Manuals

Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 12517 > < Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 12515
Page 2
background image

Mark all screws.
Slacken screws.
Tightening torque 54 34 8AZ See: Specifications/54 34 Motor-Driven Convertible Top (Electrical Components).
Align front bow centrally and align to cowl panel seal with convertible top closed.

Installation:

Check for leaks. If necessary, repeat work steps.

Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 12517 > < Removing and Installing / Replacing Convertible Top Tension Bar Bearings|Page 12515