Cooper Convertible (R52) L4-1.6L (W10) (2005)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Removing and Installing/Replacing Hydraulic Unit for ASC+T
34 51 525 - Removing and installing/replacing hydraulic unit for ASC+T
Necessary preliminary tasks:
-
Read and comply with General Information See: Service and Repair.
After completing tasks, bleed brake system.
Important!
Do not mix up brake lines and if necessary mark prior to removal.
Close off connection bores with plugs.
Press clutch pedal down to floor and secure with pedal support.
Note:
The pedal support may only be released when the brake lines are reconnected.
This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.