Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-454003.png)
Important!
Modified assignment of bearings.
Bearing (1) is at the output end (clutch end)
Bearings (1 to 5).
Important!
Clean sealing surfaces.
Do not clean sealing faces with a metal-cutting tool.
Clean sealing faces with special tool 11 4 470 only.
Bearing classification on crankcase upper half:
Bearing allocation 1-5: the designations on the crankcase and crankshaft are always required.
Refer to the table for the color code.
Example:
Bearing 1. - Letter P
Bearing 2. - Letter K
Bearing 3. - Letter I
Bearing 4. - Letter N
