Cooper Convertible (R57) L4-1.6L (N12) (2009)
/l4-1.6l_(n12)/Page-738001.png)
Oil Pressure Sensor: Service and Repair
12 61 280 - Removing and installing/replacing oil pressure sensor (N12)
Special tools required:
-
11 7 020 See: Engine, Cooling and Exhaust/Engine/Tools and Equipment/11 7 020 Socket Wrench Socket WAF 22
Warning!
Scalding hazard!
Only perform this task on an engine that has cooled down.
Necessary preliminary tasks:
-
Switch off ignition
Installation location:
On cylinder head, left.
Engine oil may emerge when oil pressure sensor is replaced; have a cleaning cloth ready.
