Cooper S (R53) L4-1.6L SC (W11) (2004)
/l4-1.6l_sc_(w11)/Page-1491001.png)
Shift Linkage: Service and Repair
Removing And Installing Gear Shift Housing
Special Tools Required:
^
23 4 010
Remove shift lever dust cover.
Remove rear exhaust.
R50 and R53:
Remove front heat shield fixings (1).
Front heat shield fixings ......................................................................................................................................................................................... 2 - 3 Nm
Remove center heat shield fixings (1).
Intermediate heat shield fixings ............................................................................................................................................................................ 2 - 3 Nm
Release shift lever cables from floor supports.
Remove shift lever housing retaining bolts (1).
Lower shift lever housing (2).
R50 only:
