Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-1268001.png)
Hood Latch Release Cable: Service and Repair
Removing and Installing/Replacing Cable For Front Engine Hood/Bonnet Locks (In Passenger
Compartment)
51 23 212 Removing And Installing/replacing Cable For Front Engine Hood/bonnet Locks (In Passenger Compartment)
Necessary preliminary tasks:
-
Remove left for cowl panel cover
-
Remove left entrance cover strip
Disengage cable (1) at lever (2).
If necessary, disengage cable (1) at guide clips up to bulkhead.
Lever out coupling (1) and open.
Disengage cable (2).
Feed cable (1) out of front bulkhead (2).
Feed cable (1) with grommet (3) out of rear bulkhead.
Installation:
