Cooper S (R56) L4-1.6L Turbo (N14) (2009)
/l4-1.6l_turbo_(n14)/Page-435003.png)
Remove chain module with timing chain.
Using a hook (2), pull oil pump chain (1) upwards.
Sprocket wheel (1) of timing chain.
Sprocket wheel (2) of oil pump.
Secure chain module (1) with rubber (3) to facilitate assembly.
Pull timing chain (2) upwards until sprocket wheel (4) rests against chain guide (1).
Install timing chain (2) and sprocket wheel (4) in this position.
Installation:
Always keep timing chain (2) tensioned; it is possible for timing chain (2) to jam on chain module (1).
Installation position of both sprocket wheels.
Sprocket wheel (1) of oil pump.
Guide rail (2) of timing chain.
Hub (3) on crankshaft.
Sprocket wheel (4) of timing chain.
