3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
C. Snap ring selection. (7)
1. Check clearance between the snap ring and clutch reaction plate. To check the clearance, hold entire circumference of the clutch reaction
plate down with 50 N (11 lbs.) force. If clearance is out of standard value, select a snap ring to obtain the standard value.
Standard value: 1.0-1.2 mm (.039-.047 inch)
D. Input shaft installation. (2)
1. Install the input shaft with one of its oil groove aligned with the punch mark on the rear clutch retainer.