3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
REVERSE (R) POSITION ALARM BUZZER CHECK
Check that the buzzer sounds when battery voltage is applied across terminals.
INSTALLATION
Installation in reverse order as removal.
NOTE: Installation service points as follows:
A. Shift lock cable connection (brake pedal side). (18)
Connect the shift lock cable so that its threads measure about 4 mm (.16 inch).
CAUTION: Do not change the routing of shift lock cable to the selector lever assembly.
B. Slide lever / key interlock cable (steering lock assembly side) / cam lever installation. (13, 14 & 15)
1) Place the ignition key at the "LOCK" position or keep it removed.
2) Install the slide lever, key interlock cable, and cam lever to the steering lock assembly as shown.
CAUTION: Do not change the routing of key interlock cable to the selector lever assembly.
D. Shift lock cable connection (selector lever assembly side). (3)
1) Place the selector lever in "P" position.
2) Disconnect the key interlock cable from the selector lever assembly side.