3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
3. Return the clutch pedal gradually from its full-stroke position to measure amount of the return made by the pedal until the interlock switch makes
an operating sound.
Standard value: 10-15 mm (.394-.591 inch)
If the amount of pedal return deviates from the standard value, adjust it by loosening the lock nut and turning the interlock switch.
4. Measure the clutch pedal clevis pin play.
Clutch pedal clevis pin play:
Standard value: 1-3 mm (.04-.12 inch)
If the clutch pedal clevis pin play is outside the standard value, adjust with the push rod.
CAUTION: Do not push in the master cylinder push rod at this time.
5. Measure pedal play. In the case of AWD vehicles, depress the pedal 2 or 3 times to eliminate booster negative pressure with the engine stopped
and then push the pedal with a finger to measure the play.
Clutch pedal play
Standard value: 6-13 mm (.24-.51 inch)
6. Measure the clearance to the toe board (or pedal stopper) when the clutch disengages. In the case of AWD vehicles, measure with the engine
running.
Clearance to toe board when clutch disengages:
Standard value: 55 mm (2.2 inch) or more
7. If the play and/or clearance is out of specification, bleed the hydraulic system or check the master cylinder, release cylinder or clutch proper.
8. Return the carpet to the original position.
