3000GT SL V6-2972cc 3.0L DOHC MFI (1997)
A. Lock pin removal. (6)
CAUTION: When removing the lock pin, turn the control lever to such position that the lock pin will not contact the clutch housing.
B. Spring pin removal. (7)
CAUTION: When removing the spring pin, pull the control shaft in the direction illustrated so that the spring pin will not contact the clutch
housing.
C. Needle bearing removal. (16 & 17)
ASSEMBLY
Assembly in reverse order as Disassembly.
NOTE: Assembly service points as follows:
