Diamante Sedan V6-3.5L SOHC (1999)
Standard Value: 3 to 5 notches @ 45 lb force
4.
After completing the adjustment, check that there is no play between the adjusting nut and the pin. Also, make sure the adjusting nut is securely
held by the nut holder.
5.
With the parking brake lever released, turn the rear wheel to make sure the rear brakes do not drag.
Parts Information
A small supply of these screw kits will be allocated to dealers who received affected vehicles. Additional orders can be placed through the normal parts
ordering system. Backing plates should be ordered as needed.
NOTE:
The original parking brake shoe hold down spring screw on affected vehicles is silver The new-style screw supplied in the kit is black.
Warranty Information
