mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Electronic Brake Control Module > < Transmission Temperature Sensor/Switch, A/T|Specifications|Page 2970
Page 1
background image

ABS Light: Testing and Inspection

ABS WARNING LIGHT INSPECTION

Check that the ABS warning light illuminates as follows.

1. When the ignition key is turned to "ON", the ABS warning light illuminates for approximately 3 seconds and then switches off.
2. When the ignition key is turned to "START', the ABS warning light remains illuminated.
3. When the ignition key is turned from "START' back to "ON", the ABS warning light illuminates for approximately 3 seconds and then switches

off.

4. If the illumination is other than the above, check the diagnostic trouble codes.

Electronic Brake Control Module > < Transmission Temperature Sensor/Switch, A/T|Specifications|Page 2970