mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

A/T - Poor Shift Quality/Shudder|Page 3529 > < Purge Solenoid - Ticking Noise/MIL ON/DTC 46 Set|Page 3524
Page 1
background image

Technical Service Bulletin # 95-23-002

Date: 950901

A/T - Poor Shift Quality/Shudder

No.: TSB-95-23-002
DATE: September, 1995
MODEL: 1995 Eclipse RS and GS

SUBJECT:    
TCM REPROGRAMMING FOR POOR SHIFT QUALITY

THIS TSB SUPERCEDES ATIN-95-23-001 ISSUED 9/8/95.

PURPOSE

Some 1995 Eclipses may experience torque converter clutch shudder during shifting, hard shifting, and/or harsh torque converter clutch engagement.
This Technical Service Bulletin describes how to reprogram the Transmission Control Module (TCM) to improve the shift quality on affected vehicles.

VEHICLES AFFECTED

1995 Eclipse RS and GS models equipped with automatic transmission (VINs starting with 4A3AK34 or 4A3AK44)

BACKGROUND INFORMATION

Poor shift quality may be due to the TCM software program. To eliminate this condition, reprogramming cartridge MlT992008 has been designed to
modify the TCM program. This cartridge was shipped to dealers during the week of September 18, 1995.

In addition to the above symptoms, if the A/T fluid is not the normal red color or if the vehicle experiences torque converter clutch shudder, also replace
the A/T fluid as described in Step 16 of this bulletin.

WARRANTY INFORMATION

Use the following warranty claim information:

TCM Reprogramming Only

Nature Code: 99D

Cause Code: 990

Labor Operation Number: 23850099

Time Allowance; 0.6 hours 

Warranty Coverage: 36 months/36,000 miles

Special Warranty Information: Transmission control module reprogramming on an as needed basis only. Includes battery removal and reinstallation.

TCM Reprogramming and A/T Fluid Change

Nature Code: 99D

Cause Code: 990

Labor Operation Number: 23850099

Time Allowance: 1.1 hours 

Warranty Coverage: 36 months/36,000 miles

Special Warranty Information: Transmission control module reprogramming and A/T fluid replacement (including driving time) on an as needed basis
only. Includes battery removal and reinstallation.

Procedure

1.

Gather the following equipment which is contained in Reprogramming Kit MIT992000-A:

Reprogramming Unit

Tool No. MIT992000

Reprogramming Cartridge

Tool No. MIT992008

EATX II Harness

Tool No. MIT992002

"Engine Compartment" and

Part No MSSF-023G-00

"Control Module" Labels

Do not install the cartridge into the Reprogramming Unit at this time.

A/T - Poor Shift Quality/Shudder|Page 3529 > < Purge Solenoid - Ticking Noise/MIL ON/DTC 46 Set|Page 3524