Eclipse L4-2.4L (4G69) (2008)
This condition occurs when the top is down.
There are no adjustments or modifications to the frame for this condition. Replace the top.
TOP COVER INSTALLATION AND OPERATION CHECK
1. Install the top cover and headliner.
2. Check clearance by inserting a piece of paper between the folded layers of the topcover as indicated in the photos below. Minimal resistance should
be felt when pulling it out. If resistance is too high raise the front section of the frame for access and add an additional washer or shim
(shims/washers can be added with the top cover installed) as outlined in Condition 2 Procedure 1.
3. Check for proper tonneau cover operation and closure by inspecting flushness of the panels to surrounding parts. If the tonneau struggles to close the
stowed top may be sitting too high. Adjust the downstop to lower the stowed top position.
PARTS INFORMATION
Use the Genuine Mitsubishi Parts listed below:
Additional items required: