Eclipse V6-3.0L SOHC (2003)
<<B>> CAMSHAFT SPROCKET REMOVAL
1. Use special tools MB990767 and MD998715 to loosen the camshaft sprocket mounting bolt.
2. Remove the camshaft sprocket.
INSTALLATION SERVICE POINTS
>>A<< CAMSHAFT OIL SEAL INSTALLATION
1. Apply engine oil to the camshaft oil seal lip.
2. Use special tools MB991559 and MD998713 to press-fit the camshaft oil seal.
>>B<< CAMSHAFT SPROCKET INSTALLATION
1. Install the camshaft sprocket.
2. Use special tools MB990767 and MD998715 to tighten the camshaft sprocket mounting bolt to the specified torque.
Tightening torque: 88 ± 10 Nm (65 ± 7 ft. lbs.)
>>C<< DISTRIBUTOR INSTALLATION
1. Align the timing mark of the camshaft sprocket (right bank) with that of the cylinder head.
