mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2355 > < Initial Inspection and Diagnostic Overview|Page 2353
Page 291
background image

STEP 17. Check the wiring harness between rear combination light (LH) connector F-17 (terminal 5) and ground.

Q: Is the wiring harness between rear combination light (LH) connector F-17 (terminal 5) and ground in good condition?

YES: Replace the rear combination light socket assembly (LH).Check that the turn-signal lights illuminate normally.

NO: Repair the wiring harness. Check that the turn-signal lights illuminate normally.

Initial Inspection and Diagnostic Overview|Page 2355 > < Initial Inspection and Diagnostic Overview|Page 2353