mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2104 > < Initial Inspection and Diagnostic Overview|Page 2102
Page 178
background image

STEP 10. Check rear combination light (RH) connector F-09 and front-ECU connector A-10X for damage.

Q: Are rear combination light (RH) connector F-09 and front-ECU connector A-10X in good condition?

YES: Go to Step 11.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. The tail light (RH) and the side marker light (RH) should illuminate
normally.

STEP 11. Check the wiring harness between rear combination light (RH) connector F-09 and front-ECU connector A-10X.

Initial Inspection and Diagnostic Overview|Page 2104 > < Initial Inspection and Diagnostic Overview|Page 2102