Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 11. Check the wiring harness between power window sub switch E-05 and ground.
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window sub switch connector E-05 and ground in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
STEP 12. Check power window sub switch connector E-05 and ETACS-ECU connector C-117 for damage.
Q: Are power window sub switch connector E-05 and ETACS-ECU connector C-117 in good condition?
YES: Go to Step 13.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. If the central door locking system works normally, input signal from the
door lock switch should be normal.
