Eclipse GS L4-2350cc 2.4L SOHC MFI (2002)
STEP 13. Check the wiring harness between power window sub switch connector E-05 and ETACS-ECU connector C-117.
NOTE: Also check intermediate connector C-95. If intermediate connectors C-95 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between power window sub switch connector E-05 and ETACS-ECU connector C-117 in good condition?
YES: Replace the ETACS-ECU. If the central door locking system works normally, input signal from the door lock switch should be normal.
NO: Repair the wiring harness. If the central door locking system works normally, input signal from the door lock switch should be normal.
Inspection Procedure P-7
ETACS-ECU does not Receive an Auto-stop Signal from the Rear Wiper Motor.