mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4801 > < Initial Inspection and Diagnostic Overview|Page 4799
Page 18
background image

STEP 3. Check the harness wires between multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM
connector C-57 <2.4L-A/T>, C-59 <3.0L-A/T>.

NOTE:  After checking intermediate connector B-36 and C-28, joint connector C-77, check the wires. If intermediate connector B-36 and C-28, joint
connector C-77 are damaged, repair or replace them. Refer to Harness Connector Inspection.

Q: Is the harness wires between multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM connector C-57
<2.4L-A/T>, C-59 <3.0L-A/T> in good condition?

Initial Inspection and Diagnostic Overview|Page 4801 > < Initial Inspection and Diagnostic Overview|Page 4799