mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 4800 > < Initial Inspection and Diagnostic Overview|Page 4798
Page 17
background image

STEP 2. Check the connector between multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM connector
C-57 <2.4L-A/T>, C-59 <3.0L-A/T> for damage.

Q: Are multi-center display connector C-09 and vehicles speed sensor connector B-39 <M/T> or PCM connector C-57 <2.4L-A/T>, C-59 <3.0L-A/T>
in good condition?

YES: Go to Step 3.

NO: Repair or replace it. Refer to Harness Connector Inspection. 

Initial Inspection and Diagnostic Overview|Page 4800 > < Initial Inspection and Diagnostic Overview|Page 4798