mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2107 > < Initial Inspection and Diagnostic Overview|Page 2105
Page 190
background image

STEP 34. Check rear combination light (RH) connector F09 and front-ECU connector A-10X for damage.

Q: Are rear combination light (RH) connector F-09 and front-ECU connector A-10X in good condition?

YES: Go to Step 35.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the tail light (RH) illuminates normally.

Initial Inspection and Diagnostic Overview|Page 2107 > < Initial Inspection and Diagnostic Overview|Page 2105