Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
STEP 47. Check the wiring harness between rear side marker light (RH) connector F-11 and front-ECU connector A-10X.
NOTE: Also check intermediate connector C-89, junction block connectors C-101 and C-112. If intermediate connector C-89, junction block connector
C-101 or C-112 is damaged, repair or replace the connector as described in Harness connector Inspection.
Q: Is the wiring harness between rear side marker light (RH) connector F-11 and front-ECU connector A-10X in good condition?
YES: Replace the rear side marker light socket (RH). Check that the rear side marker light (RH) illuminate normally.
NO: Repair the wiring harness. Check that the rear side marker light (RH) illuminate normally.
STEP 48. Check the license plate light bulb.
1. Remove the license plate light bulb.
2. Check that the license plate light bulb is not broken.
Q: is the license plate light bulb in good condition?
YES: Go to Step 49.
NO: Replace the license plate light bulb. Check that the license plate light illuminate normally.
STEP 49. Measure at license plate light connector F-15 in order to check the ground circuit to the license plate lights.
1. Disconnect license plate light connector F-15, and measure at the wiring harness side.
