Eclipse RS L4-2350cc 2.4L SOHC MFI (2002)
2. Measure the resistance value between terminal 1 and ground.
-
The measured value should be 2 ohm or less.
Q: Does the measured resistance value correspond with this range?
YES: Go to Step 52.
NO: Go to Step 50.
STEP 50. Check license plate light connector F-15 for damage.
Q: Is license plate light connector F-15 in good condition?
YES: Go to Step 51.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the license plate light illuminate normally.