mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Air Bag Module, Clock Spring & Steering Wheel|Page 4346 > < Air Bag Module, Clock Spring & Steering Wheel|Page 4344
Page 5
background image

Post-installation Inspection

1. After installing the clock spring, the steering wheel, the column covers and the air bag module, check steering wheel for noise, binds or difficult

operation.

2. Reconnect the negative battery terminal. Turn the ignition key to the "ON" position. Does the SRS" warning light illuminate for about 7 seconds,

turn OFF and then remain OFF? If yes, SRS system is functioning properly. If no, refer to Air Bags (Supplemental Restraint Systems)/Testing and
Inspection/Procedures.

AIRBAG MODULE

Removal

1. Negative (-) Battery Cable Disconnection

Disconnect the negative battery cable from the battery and tape the terminal.

Air Bag Module, Clock Spring & Steering Wheel|Page 4346 > < Air Bag Module, Clock Spring & Steering Wheel|Page 4344