Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 8. Check combination meter connector C-41 for damage.
Q: Is combination meter connector C-41 in good condition?
YES: Go to Step 9.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the seat belt warning light illuminates normally.
STEP 9. Check the wiring harness between combination meter connector C-41 and the ignition switch (IG1).
NOTE: Also check junction block connectors C-108 and C-111. If junction block connector C-108 or C-111 is damaged, repair or replace the
connector as described in Harness Connector Inspection.
Q: Is the wiring harness between combination meter connector C-41 and the ignition switch (IG1) in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the seat belt warning light illuminates normally.
