Endeavor 2WD V6-3.8L (6G75) (2008)
/Page-568602.png)
4. Measure the resistance between joint connector (4) terminal 5 and data link connector terminal 14.
OK: 2 ohms or less
5. Measure the resistance between joint connector (4) terminal 16 and data link connector terminal 6.
OK: 2 ohms or less
CAUTION: Strictly observe the specified wiring harness repair procedure.
Q: Do all the resistances measure 2 ohms or less?
YES [all the resistances measure 2 ohms or less: When any repair done] : Retest the system.
YES [all the resistances measure 2 ohms or less: When no repair done] : Diagnose CAN bus lines thoroughly by referring to Diagnostic Item
19. See: Diagnostic Item 19 [Vehicles without multi-center display (middle-grade type)] See: Diagnostic Item 20 or [Vehicles with multi-center
display (middle-grade type)].
