Galant L4-1997cc 2.0L SOHC 16 Valve (1993)
Clutch Slave Cylinder: Overhaul
DISASSEMBLY SERVICE POINT
A. PISTON AND PISTON CAP REMOVAL
Remove the piston from the release cylinder using compressed air.
CAUTION:
(1) Cover with shop towel to prevent the piston from popping out.
(2) Apply compressed air slowly to prevent brake fluid from splashing.
INSPECTION
-
Check the inner surface of the release cylinder for scratches or irregular wear.
-
Replace if the piston cup outer circumference is scratched or shows signs of fatigue, or if there is excessive wear of the lip where indicated in the
figure.
