Galant V6-2972cc 30L SOHC (1988) - Seats - Rear Seatback Won't Release
FIGURE 3
4.
If the seatback will still not release, insert a short flat head screwdriver into the release lever hole and manually release the lock by pressing down
on the hinge point as shown in figure 3.
FIGURE 4
REPAIR PROCEDURE
After the seatback has been released as described above, use a flathead screwdriver to bend the "L" bracket inside the seatback downward about 5 mm as
shown in Figure 4. This will prevent this condition from recurring.
WARRANTY INFORMATION
Labor Operation Code:
23206000
Time Allowance:
0.2 hr.