Galant DE L4-2350cc 2.4L SOHC MFI (2000)
STEP 5. Check the harness wires between ETACS-ECU connector C-86 and intermediate connector C-67.
NOTE: After checking junction block connector C-78, check the wires. If junction block connector C-78 is damaged, repair or replace it. Refer to
Harness Connector Inspection.
If the harness wires between ETACS-ECU connector C-86 and intermediate connector C-67 are damaged, repair them.
The central door locking system should work normally.
If the harness wires are in good condition, replace the ETACS-ECU.
The central door locking system should work normally.
Inspection Procedure C-2
