Galant DE L4-2350cc 2.4L SOHC MFI (2000)
STEP 3. Check the harness wires between ETACS-ECU connector C-86 and fusible link (1).
NOTE: After checking junction block connector C-85 and intermediate connector C-66, check the wires. If junction block connector C-85 and
intermediate connector C-66 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between ETACS-ECU connector C-86 and fusible link (1) are damaged, repair them.
The central door locking system should work normally.
STEP 4. Check the junction block connector C-86 for damage.
If the junction block connector C-86 is damaged, repair or replace it. Refer to Harness Connector Inspection.
The central door locking system should work normally.
If the connector is in good condition, go to Step 5.