Galant LS V6-3.0L SOHC (1999)
STEP 8. Check the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-81.
NOTE: After checking intermediate connector C-66, check the wires. If intermediate connector C-66 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between theft-alarm horn relay connector A-11X and ETACS-ECU connector C-81 are damaged, repair them.
The answerback function should work normally.
If the harness wires are in good condition, go to Step 9.
