Galant LS V6-3.0L SOHC (1999)
STEP 6. Check the harness wires between theft-alarm horn relay connector A-11X and fusible link (1).
NOTE: After checking junction block connectors C-77 and C-85 and intermediate connector C-66, check the wires. If junction block connectors C-77
and C-85 and intermediate connector C-66 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between theft-alarm horn relay connector A-11X and fusible link (1) are damaged, repair them.
The answerback function should work normally.
STEP 7. Check the theft-alarm horn relay connector A-11X and ETACS-ECU connector C-81 for damage.
If the theft-alarm horn relay connector A-11X and ETACS-ECU connector C-81 are damaged, repair or replace them. Refer to Harness Connector
Inspection.
The answerback function should work normally.
If the connectors are in good condition, go to Step 8.
