Galant LS V6-3.0L SOHC (1999)
STEP 4. Check the harness wires between fog light switch connector C-25 and ground.
NOTE: After checking joint connector C-56, check the wires. If joint connector C-56 is damaged, repair or replace it. Refer to Harness Connector
Inspection.
If the harness wires between fog light switch connector C-25 and ground are damaged, repair them.
The fog light switch input signal should be able to be checked and the fog lights should work normally.
STEP 5. Check the fog light switch connector C-25 and ETACS-ECU connector C-82 for damage.
If the fog light switch connector C-25 and ETACS-ECU connector C-82 are damaged, repair or replace them. Refer to Harness Connector Inspection.
The fog light switch input signal should be able to be checked and the fog lights should work normally.
If the connectors are in good condition, go to Step 6.
