Galant LS V6-3.0L SOHC (1999)
STEP 6. Check the harness wire between fog light switch connector C-25 and ETACS-ECU connector C-82.
If the harness wire between fog light switch connector C-25 and ETACS-ECU connector C-82 is damaged, repair it.
The fog light switch input signal should be able to be checked and the fog lights should work normally.
If the harness wire is in good condition, replace the ETACS-ECU.
The fog light switch input signal should be able to be checked and the fog lights should work normally.
Inspection Procedure N-6