Galant LS V6-3.0L SOHC (1999)
Driver's Door Lock Key Cylinder Switch
If the driver's door lock key cylinder switch is not defective, go to Step 2.
Front Passenger's Door Lock Key Cylinder Switch
If the front passenger's door lock key cylinder switch is not defective, go to Step 7.
STEP 2. Check the driver's door lock key cylinder switch ground circuit at driver's door lock key cylinder switch connector E-14.
1. Disconnect driver's door lock key cylinder switch connector E-14 and measure at the harness side.
2. Resistance between terminal 2 and ground.
-
Should be less than 2 Ohms.
If open circuit, go to Step 3.
If less than 2 Ohms, go to Step 5.
STEP 3. Check the driver's door lock key cylinder switch connector E-14 for damage.
If driver's door lock key cylinder switch connector E-14 is damaged, repair or replace it. Refer to Harness Connector Inspection.
The input signal from the driver's door lock key cylinder switch should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
