Galant LS V6-3.0L SOHC (1999)
The input signal from the rear door lock actuator switch (RH) should be able to be checked and the Theft-alarm system should work normally.
STEP 20. Check the rear door lock actuator switch (RH) connector E-10 and ETACS-ECU connector C-81 for damage.
If the rear door lock actuator switch (RH) connector E-10 and ETACS-ECU connector C-81 are damaged, repair or replace them. Refer to Harness
Connector Inspection.
The input signal from the rear door lock actuator switch should be able to be checked and the Theft-alarm system should work normally.
If the connectors are in good condition, go to Step 21.