Galant LS V6-3.0L SOHC (1999)
STEP 21. Check the harness wires between rear door lock actuator switch (RH) connector E-10 and ETACS-ECU connector C-81.
NOTE: After checking intermediate connectors C-69 <1999 models>, C-71 <2000 models> and D-07, check the wires. If intermediate connectors C-69
<1999 models>, C-71 <2000 models> and D-07 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between rear door lock actuator switch (RH) connector E-10 and ETACS-ECU connector C-81 are damaged, repair them.
The input signal from the rear door lock actuator switch (RH) should be able to be checked and the theft-alarm system should work normally.
If the harness wires are in good condition, replace the ETACS-ECU.
The input signal from the rear door lock actuator switch (RH) should be able to be checked and the theft-alarm system should work normally.
Inspection Procedure N-10