Lancer L4-2.4L (4B12) (2009)
Removal Steps 6-11
REMOVAL SERVICE POINT
[[A]] CLUTCH TUBE ASSEMBLY A DISCONNECTION
CAUTION
^
Do not remove the O-rings and the clips from the clutch tube assembly A and the clutch master cylinder.
^
If the O-rings or the clips of the clutch tube assembly A and the clutch master cylinder are damaged, replace each assembly.
[[B]] CLUTCH MASTER CYLINDER AND CLUTCH PEDAL ASSEMBLY REMOVAL
Remove the clutch master cylinder and clutch pedal assembly from inside the vehicle.
[[C]] CLUTCH MASTER CYLINDER REMOVAL
Pull out the clutch master cylinder by turning the cylinder 45° to the direction of the arrow shown in the figure.
INSTALLATION SERVICE POINT
]]A[[ CLUTCH TUBE ASSEMBLY A CONNECTION
CAUTION