Lancer Evolution L4-2.0L DOHC Turbo (2003)
Clutch Switch: Testing and Inspection
Clutch Interlock Switch Check and Adjustment
CLUTCH INTERLOCK SWITCH CHECK AND ADJUSTMENT
1. Check to be sure that the interlock switch is as shown in the illustration when the clutch pedal is depressed at its full stroke 149.9 mm (5.90
inches). If not at the specified dimension, loosen the clutch interlock switch 1/4 turn counterclockwise. Then slide the switch to the specified
dimension, and turn the switch 1/4 turn clockwise to lock.
2. Connect an ohmmeter to the interlock switch connector, and then check for continuity when the clutch pedal is fully depressed and when it is
released outward.
3. If the continuity is incorrect, replace the interlock switch.
