mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Ignition Switch Lock Cylinder|Testing and Inspection|Page 3571 > < Interlock Switch Operating Check|Page 3566
Page 1
background image

Ignition Switch Lock Cylinder: Testing and Inspection

KEY REMINDER SWITCH AND IGNITION KEY RING ANTENNA CONTINUITY CHECK

1. Ignition key reminder switch continuity check.

Disconnect key reminder switch connector C-88 without removing the ignition switch and steering lock cylinder. Then check the continuity.

2. Ignition key ring antenna check.

Check for continuity between terminal 3 and terminal 7. 

Standard value: ................2 Ohm or less

Ignition Switch Lock Cylinder|Testing and Inspection|Page 3571 > < Interlock Switch Operating Check|Page 3566