Lancer LS L4-2.0L SOHC (2002)
STEP 4. Check the wiring harness between ETACS-ECU connector C-226 and fusible link 1.
NOTE: Also check junction block connector C-212 and intermediate connector C-126. If junction block connector C-212 or intermediate connectors
C-126 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness between ETACS-ECU connector C-226 and fusible link 1. in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the central door locking system works normally.
STEP 5. Check ETACS-ECU connectors C-226, C-227 and driver's door lock actuator connector E-04 for damage.
Q:Are ETACS-ECU connectors C-226, C-227 and driver's door lock actuator connector E-04 in good condition?
YES: Go to Step 6.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the central door locking system works normally.