Lancer LS L4-2.0L SOHC (2002)
STEP 6. Check the wiring harness from ETACS-ECU connectors C-226 and C-227 to driver's door lock actuator connector E-04.
NOTE: Also check junction block connector C-214 and intermediate connector C-17. If junction block connector C-214 or intermediate connectors
C-17 is damaged, repair or replace the connector as described in Harness Connector Inspection.
Q: Is the wiring harness from ETACS-ECU connectors C-226 and C-227 to driver's door lock actuator connector E-04 in good condition?
YES: Replace the ETACS-ECU. Check that the central door locking system works normally.
NO: Repair the wiring harness. Check that the central door locking system works normally.
Inspection Procedure C-2
Central Door Locking System: Some Doors do not Lock or Unlock
